Ec Declaration Of Conformity - AEG PS216L3 Originalbetriebsanleitung

Use only AEG accessories and spare parts. Should components
need to be replaced which have not been described, please contact
one of our AEG service agents (see our list of guarantee/service
addresses).
If needed, an exploded view of the tool can be ordered. Please
state the Article No. as well as the machine type printed on
the label and order the drawing at your local service agents or
directly at: Techtronic Industries GmbH, Max-Eyth-Straße 10,
71364 Winnenden, Germany.
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that the product described
under "Technical Data" fulfills all the relevant provisions of the
directives
2011/65/EU (RoHS)
2006/42/EC
2014/30/EU
and the following harmonized standards have been used.
EN 62841-1:2015
EN IEC 62841-3-9:2020+A11:2020
EN 55014-1:2017
GB
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-11:2000
EN IEC 63000:2018
Winnenden, 2021-07-15
Alexander Krug / Managing Director
Authorized to compile the technical file
Techtronic Industries GmbH
Max-Eyth-Straße 10, 71364 Winnenden, Germany
English
38 38
SYMBOLS
CAUTION! WARNING! DANGER!
Always disconnect the plug from the socket before
carrying out any work on the machine.
Replace the kert plate
WARNING-To reduce the risk of injury, user must read
instruction manual!
Always wear goggles when using the machine.
Wear ear protectors!
Wear gloves!
Always keep hands away from the path of the saw
Icons
blade.
This tool is only suitable for indoor use. Never expose
tool to rain.
Cut wood only.
Do not stare into beam.
This product corresponds to the laser class 2 in
LASER
2
accordance with EN 60825-1:2014.
λ: 650nm; P≤1mW EN 60825-1:2014
Saw blade dia. x hole dia
Rotation direction
Blade teeth
40
Width of cut
2,4 mm
n
No-load speed
0
V
Voltage
AC Current
Class II tool. Tool in which protection against electric
shock does not rely on basic insulation only, but in
which additional safety precautions, such as double
insulation or reinforced insulation, are provided.
There being no provision for protective earthing or
reliance upon installation conditions.
Do not dispose of electric tools together with
household waste material. Electric tools and electronic
equipment that have reached the end of their life
must be collected separately and returned to an envi-
ronmentally compatible recycling facility. Check with
your local authority or retailer for recycling advice and
collection point.
European Conformity Mark
Ukraine Conformity Mark
EurAsian Conformity Mark