Srew Anchor Pull-Out Forces - Paramondo EASY Montageanleitung

Screw anchor pull-out forces
Pull-out forces state the force required for
pulling a screw out of the wall. No difference
is made between the screw plus screw an-
chor coming out of the wall, the screw brea-
king or the brickwork failing.
The pull-out forces state the maximum ten-
sile force that may be exerted on the screw
and/or screw anchor.
The fixing material must be selected to
match the fitting base, type of fitting and
pull-out forces.
The values in the table are stated in kN and
express the pull-out force of the anchor
(screw / screw anchor) which is subjected to
the highest tension.
The values are calculated for an anchor in
unbroken concrete.
The selection of the most suitable fixing ma-
terial depends on the type of fitting base and
its physical condition. The fitter is responsib-
le for checking the fitting base prior to fitting
the awning.
The screw anchor pull-out forces are calcu-
lated on the basis of Wind Resistance Class
1 in accordance with the EN 13561 and EN
1932 standards.
Screw anchor pull-out forces
Size from
250 cm x 200 cm
295 cm x 200 cm
350 cm x 250 cm
395 cm x 250 cm
www.paramondo.de
35
N/Console number
Wall Ceiling
435/2 705/2
526/2 824/2
847/2 1288/2
981/3 1451/3