Herunterladen Inhalt Inhalt Diese Seite drucken

Warranty In Case Of Installation & Preparing - Paramondo EASY Montageanleitung

Gelenkarmmarkise
Vorschau ausblenden Andere Handbücher für EASY:
Inhaltsverzeichnis

Werbung

38
Warranty in case of installation & Preparing
Instructions for the installation of awnings and the exclusion of warranty in case of installation
on unsuitable surfaces and in case of improper installation:
The awnings can basically be installed in three ways:
• Installation on a wall e.g. house wall
• Installation on a ceiling e.g. under a balcony
• Installation on rafters
These basic types of installation can be considered as direct or at least close to a fixed structure capable of
protecting the awnings against strong wind and/or bad weather.
We assume the legal warranty for any defects in our awnings only for awnings that have been professionally
installed on one of the above-mentioned surfaces in accordance with the above statements. DIN EN 13561
applies.
We expressly exclude the statutory warranty for awnings which, contrary to the above, have not been
mounted on one of the above-mentioned bases, e.g. wooden or steel scaffolding, fences etc.
We also expressly exclude the statutory warranty for awnings that have not been installed properly and
professionally.
Preparing
For the assembly of the awning, depending on the size, at least 2 people are required.
From a width of 500 cm, we recommend 4 people for the assembly of the awning.
The fitting time for the awning is about 2 hours.
1. Remove the awning and the fitting material from the packaging.
2. When unpacking, note that the articulated brackets are under tension and may fold out.
3. Check whether the package contents are complete and look for any damage.
• Do not install the awning if parts are missing or damaged.
• It is not possible to submit a complaint regarding damage or missing parts after installation.
4. Store the awning on a stable surface (mounting blocks, workbench, floor).
5. Remove all transport safety devices.
6. Keep all the necessary tools and installation materials accessible.
7. Make sure that the wall you want to fit the awning to is suitable for fitting.
• The manufacturer does not assume any liability for fitting bases that are too weak or damaged.
8. Never make any changes to the awning construction.
• The manufacturer does not assume any liability in case of changes to the awning construction.
www.paramondo.de

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis