Setting Up Appliances In Tandem - hanseatic HGS18560ENFDBI Gebrauchsanleitung

Setting up appliances in tandem

If you wish, you can set up this appliance in tandem with the HKS18560EDWDBI refrigerator.
You will find the following parts in the kit provided:
(22) 1× Upper cover
(23) 3×
(24) 1× Connecting piece for the front of the appliance
(25) 1× Cover panel for the connecting piece for the front of the appliance (24)
(26) 8×
(27) 4×
(28)
1. Place the two appliances next to each other
and use the screw feet on each appliance
to ensure that they are both positioned at
the same height.
Setting up appliances in tandem
Connecting piece for the back of the appliance (2×) and top of the
appliance (1×)
Screw to secure the connecting piece to the front of the appliance (24)
(2×), the connecting piece to the roof (23) (2×) and the upper cov-
er (22) (4×).
Screws to secure the connecting pieces to the back of the appli-
ance (23)
1 x seal profile
(23)
2. First, connect the appliances using two of
the connecting pieces (23) and four of the
screws (27).
Page EN-25
(27)
(27)