About Climate Categories; Setting Up And Aligning The Appliance - hanseatic HMGS5144FW Gebrauchsanleitung

To achieve the highest possible cooling per-
formance with the least energy consumption,
choose a location that:
– is not too warm, is dry and well ventilated,
– is not in direct sunlight,
– measures at least 10 m
We do not advise placing it directly next to
an oven, stove or radiator. The minimum dis-
tances to such appliances are:
– from electrical hobs
– from oil and coal burning stoves
– from refrigerators
– from washing machines/dishwashers 2 cm
If these distances cannot be maintained,
place an insulating plate in-between. If un-
derfloor heating is installed in the room where
the mini refrigerator is to be installed, place an
insulating plate of solid material underneath.

About climate categories

• Observe the specified ambient tempera-
ture (see "Intended use" on page EN-5).
Climate category means that the appliance is
intended for operation at the specified ambi-
ent temperature (see table 'Climate catego-
ries'). If the room temperature drops signifi-
'Climate categories' table
Zone description
Extended temperate zone
Temperate zone
Subtropical zone
Tropical zone
.
3
3 cm
30cm
2 cm
Code Definition
This appliance is designed for use at ambient tempera-
SN
tures of +10 °C to +32 °C.
This refrigerator is designed for use at ambient temper-
N
atures of +16 °C to +32 °C.
This refrigerator is designed for use at ambient temper-
ST
atures of +16 °C to +38 °C.
This refrigerator is designed for use at ambient temper-
T
atures of +16 °C to +43 °C.
Start-up
cantly below this, the appliance will not switch
on as often. This indicates that an unwelcome
increase in temperature may occur.
Setting up and aligning the
appliance
1. Place the appliance on as flat and as firm
a base as possible. In doing so, ensure
– that the entire space above the appli-
ance is clear;
– that there is adequate wall clearance.
Leave space of at least 3 cm.
(3)
2. Check the position with a spirit level.
Page EN-19