D) Single/Quad/Auto Mode; E) Starting/Terminating Recording Manually; F) Display Of Signal Strength - Renkforce 808578 Bedienungsanleitung

d) Single/Quad/Auto Mode

The DVR offers three different display modes. To switch between the display modes, push the button „PLAY/
ENTER" on the DVR or the button „
screen/TV shows an icon for the respective display mode.
= Single mode
The selected channel (1, 2, 3 or 4) is displayed permanently. The „4CH" button on the DVR or the „4"
button on the IR-remote control can be used to manually switch to a different channel. At the upper left
in the display of the screen/TV, the associated channel number of the currently active channel is dis-
played.
Unused channels can be deactivated in the OSD menu (e.g. if you only operate two cameras at channels
1 and 2, channels 3 and 4 can be deactivated), see chapter 11 c), function „Activation".
= Quad mode
All four channels are displayed at once. The displays are reduced to 1/4 of the regular size. The top left
of each small image shows the associated channel number.
= Auto mode
The DVR switches the channels automatically and displays the image of each channel for a few seconds
each before switching on to the next channel.
Channels that are not assigned (e.g. if you only use two cameras at channels 1 and 2), are not dis-
played.
You may also switch off certain channels in the OSD menu if they are not to be displayed in the auto
mode, see chapter 11 c), function „Activation".

e) Starting/Terminating Recording Manually

Push the button „REC/STOP" on the DVR or the IR remote control to start or terminate the recording.
If a recording is running, the lower right of the display of the connected screen/TV shows a red
dot.
During recording, some operating functions are not possible. For example, the OSD menu cannot
be called.
f) Display of the Signal Strength
At the upper right of the display (in Quad mode at the upper right in each of the four camera
screens), a symbol is displayed for displaying the signal strength of the received radio signal
of the camera. The more dashes are visible, the stronger the signal is received.
52
" on the IR remote control repeatedly. The top of the display on the