Usb Mode; Hdmi Output - VOLTCRAFT 2304480 Bedienungsanleitung

Analyse an Image
When the current file type is an image, press "
Play a Video
When the current file type is a video, press "
Delete a File
Press " " to delete the current file.
k) USB mode
• Connect the USB cable to the device. The following menu will be displayed:
• There are two USB modes: Storage and PC Camera. Press the up or down button to switch modes.
l) HDMI output
• The video output function allows you to display the thermal image (not including the options menu) on an external
monitor or video recording device capable of managing HDMI systems.
• To connect the thermal imager, proceed as follows:
1 Connect the thermal imager to an external HDMI monitor or recording device using the HDMI video cable provided.
2 Turn on the external HDMI monitor or device.
3 Power on the thermal imager.
4 The thermal imager's display works simultaneously when the image is displayed on the external HDMI monitor
or device.
5 Once you have finished, switch off the external device and disconnect the HDMI video cable from the thermal
imager.
" to enter Image analysis mode.
" to play the video.
75