VOLTCRAFT 2304480 Bedienungsanleitung Seite 70

Temperature Range
• The temperature measurement ranges are "-20~150°C"
and "0~650°C".
• Within these ranges, the "-20~150°C" setting is more
accurate.
Emissivity: Quick set the emissivity from the table below:
Material Emissivity
Water 0.96
Stainless Steel 0.14
Aluminum Plate 0.09
Asphalt 0.96
Concrete 0.97
Cast Iron 0.81
Alarm mode:
Alarm mode:
• OFF: Turn off the alarm display and sound.
• Above Alarm: If the temperature of the object exceeds the above alarm value, the alarm will sound and display.
• Below Alarm: If the temperature of the object is below the low alarm value, the alarm will sound and display.
• Zone Alarm: If the temperature of the object is between the below alarm value and the above alarm value, the
alarm will sound and display.
Image Align
Press "
Press " " to cancel the setting, press "
70
Material
Rubber
Wood
Brick
Tape
Brass Plate
Human Skin
" to adjust the vision image's position and align the vision and infrared images.
" to save the aligment setting.
Emissivity Material
0.95 PVC Plastic
0.85 Polycarbonate
0.75 Oxidized
Copper
0.96
Rust
0.06
Paint
0.98
Soil
Emissivity
0.93
0.80
0.78
0.80
0.90
0.93