Miele PW6 7 Serie Umbau- Und Montageanweisung Seite 24

M.-Nr. 09087201
A
To save, confirm with the OK  button.
A
Check the dispensing in the programs and adjust if necessary.
A
To exit the service level, switch off the machine.
A
Install the liquid-dispensing cover plate to the machine's rear panel.
Registering the water recycling (WRG)
A
Main menu
In the Service level >
set the parameter value to
A
Press the Back button 2 times to go back 2 levels.
A
To save, confirm with the OK  button.
Carrying out final work
A
Check the water connections for leaks.
A
Reattach the machine lid.
A
Connect the machine to the power supply and switch it on.
A
Reconnect the machine to the gas supply if there is one and it has previously been disconnected.
A
Carry out appropriate electrical safety and functional tests.
When carrying out the functional test, select a program with parameters that uses the new function.
en-US
Diese Unterlagen dürfen ohne unsere Genehmigung weder vervielfältigt noch Dritten zugänglich gemacht werden. Eigentumsrechte vorbehalten.
Service settings
> >
K6
.
Umbau- und Montageanweisung
Basic setting Water inlet
>
Valve block 2 Water valve 3:
> >
24 von 54
,
20.01.2022