Operating Elements And Connections - Omnitronic PM-444Pi Bedienungsanleitung

4 Operating Elements and Connections

No. Element
1 DJ MIC input
2 GAIN control
3 HIGH, LOW tone controls
4 Microphone selector
5 Input source selector
6 GAIN control
7 HIGH, MID, LOW tone
controls
8 CUE assign switch with LED
9 Crossfader assignment
switches
Function
Balanced XLR input for connecting a DJ microphone.
Volume control for the DJ microphone.
Allows the adjustment of the high and low range for the DJ
microphone.
On/off switch with LED indicator for the microphone. Select
TALKOVER to attenuate the level of channel 1-4 in case of
microphone announcements.
Selects the input source to be used with the respective input
channel.
For adjusting the input amplification for the respective input channel.
The adjacent LED meter indicates the channel level ahead of the
channel fader.
Allows the adjustment of the high, mid and low range for the
respective input channel.
Assigns the respective channel to the headphone bus for pre-fader-
listening by means of the headphone output. The LED indicates the
pressed position.
Allows to send the respective channel's signal either directly to the
master bus, or to the left side of the crossfader when set to position
"A", or to the right side of the crossfader when set to the position
"B". When all input channels are assigned directly to the master
bus, the crossfader is disabled and the desired volume ratio can be
set with the channel controls.
14 • EN