Connecting The Control Unit - HEIDENHAIN EIB 5000 Betriebsanleitung

Route the cable based on the mounting variant
Connect the sensors to the respective connections.
Ensure full-surface shield connection
EIB 5181: X136 and X108
EIB 52xx: X1; 7-pin M17 (male)
WARNING
Danger of electric shock!
This may result in serious personal injury or death.
If the temperature sensors are not designed to provide
double or reinforced insulation:
Connect the metal housing of the connector to
protective ground
5.4 Connecting the encoder
Comply with the pin layout
Further information: "EIB 5181", Page 310
Further information: "EIB 521x & EIB 5291S",
Page 311
Further information: "EIB 528x", Page 314
Route the cable based on the mounting variant
Connect the encoder to the respective connection
EIB 5181: X401; 25-pin D-sub (male)
EIB 521x & EIB 5291S: X2; 12-pin M12 (female)
EIB 528x: X2; 17-pin M23 (female)
52
5.5

Connecting the control unit

Comply with the pin layout
Further information: "EIB 5181", Page 310
Further information: "EIB 521x & EIB 5291S",
Page 311
Further information: "EIB 528x", Page 314
Route the cable based on the mounting variant
Connect the control unit to the respective connection
EIB 5181: X421; 25-pin D-sub (female)
EIB 521x & EIB 5291S: X3; 8-pin M12 (male)
EIB 528x: X3; 17-pin M23 (male)
HEIDENHAIN | EIB 5000 | Operating Instructions | 04/2021