HEIDENHAIN EIB 5000 Betriebsanleitung Seite 51

EIB 5281 (X1, X2, X3)
EIB 5282 (X1, X2, X3, X4)
X4 X1
X3 X2
EIB 5181
S1 S2 S3
X75
X108 X136
HEIDENHAIN | EIB 5000 | Operating Instructions | 04/2021
5.3 Connecting the temperature sensors
The EIB 52xx variants are designed to operate in a
predefined manner. The connected temperature sensors
and the defined time constant are indicated on the ID
label and in the product brochure. The switching output
for errors and warnings is preset based on the variant. All
EIB 528x variants are preconfigured for using the PT1000
as temperature output format.
With the EIB 5181 variant, you can use the DIP switches
to define its mode of operation.
"DIP switch", Page 54
Example (information on ID label and assignment to X1)
1KTY84 1PTCD:
Temperature sensor 1 = KTY84-130
Temperature sensor 2 = PTC triplet
Temperature sensor 3 = Not connected
KTY84KTY84PTCD:
Temperature sensor 1 = KTY84-130
Temperature sensor 2 = KTY84-130
Temperature sensor 3 = PTC triplet
Comply with the pin layout
"EIB 5181", Page 310
Further information:
"EIB 521x & EIB 5291S",
Further information:
Page 311
"EIB 528x", Page 314
Further information:
Further information:
51