Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
H
OW TO REPLACE THE BURNER
1. Remove the pot grid(s).
2. Remove the burner caps (A) and pull out the burner crowns (B).
3. Unscrew the burner-jets using a socket spanner (7 mm / D): s. fig. below.
Store the removed burner-jets for natural gas in a dry and safe place for a possible
future use.
A
B
C
D
4. Replace the removed burner-jets for natural gas with the burner-jets for LPG
(propane gas) supplied, according to the table of burners and burner-jets
characteristics: s. chapter 2.9.1 LPG:
CHARACTERISTICS
5. Tighten the burner-jets for LPG (propane gas) carefully using a suitable socket
spanner (s. fig. below).
-
JETS FOR THE OPERATION WITH
Fig. similar: modifications are possible.
B
URNER
S
OCKET SPANNER
.
Fig. similar: modifications are possible.
~
B
URNER CAP
B
URNER CROWN
-
(for natural gas)
JET
(7
MM
TABLE OF BURNERS AND BURNER
~
143
LPG.
)
-
JETS
Werbung
Inhaltsverzeichnis
