Replacing Of The Illuminant - Pkm GH6-90B5D Bedienungsanleitung

NOTICE! Any damage that is caused to your appliance by improper
removal or installation of the side racks will not be fixed free of charge,
even if the guarantee period of the appliance is still valid.

7.7 Replacing of the illuminant

WARNING! Switch off the appliance and let it cool down completely.
Disconnect the appliance from the mains before maintenance (fuse box of
your household power supply)! RISK OF ELECTRIC SHOCK!
NOTICE! When you replace the illuminant, always use a clean cloth or
gloves. Never touch the new illuminant with your bare hands.
NOTICE! Never use a screwdriver to remove the cover. Remove the cover
by hand only! RISK OF DAMAGE!
1. Disconnect the appliance from the mains: switch off the corresponding
fuse in the fuse box of your household power supply!
2. Place a dishcloth in the interior of the cold oven to protect it from possible
damage.
3. Unscrew the lamp cover (A) anticlockwise (s. fig. below). Clean the lamp cover
and wipe it dry thoroughly.
4. Unscrew the illuminant (B) from the socket (s. fig. below) and replace it with a
high temperature illuminant (300 °C) of the same type: voltage 230 V / power
25 W. Do not use any other type of illuminant.
5. Screw the new illuminant in. Check its proper position in the socket.
6. Reinstall the lamp cover.
7. Remove the dishcloth and switch on the corresponding fuse in the fuse box of
your household power supply again.
Fig. similar: modifications are possible.
~
201
~