Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4.4.5 Power failure
P
OWER FAILURE
In the event of a power failure or ignition failure, you can use a commercially
available gas lighter or an extra-long match to ignite the burner flame. In such a
case, be especially careful. RISK OF BURNS!
WARNING! In such a case, do not use a normal lighter or a normal
match to ignite the burner flame. RISK OF BURNS!
P
OWER FAILURE
❖ In the event of a power failure, any cooking process is interrupted. Turn the rotary
knobs for the oven functions and the temperature control to position O
to switch off the oven completely.
❖ After a power failure: the display indicates «
flashes. Press the buttons « D
and « E
ND OF THE COOKING
the time setting mode. Set the current time (s. chapter 4.3.3 S
/
SYSTEM TIME
Before you can use the oven properly, you must set the current time / system
time.
WARNING! During a power failure: Ensure that the rotary knobs of the
oven function and the temperature control are each set to position O
to switch off the oven completely. If the rotary knobs are not set to
«
»
position O
FF «
is available again.
:
IMPORTANT NOTES REGARDING THE GAS HOB
:
IMPORTANT NOTES REGARDING THE OVEN
URATION OF THE COOKING
/
BAKING TIME
).
, the oven will start heating again as soon as the power
»
» once simultaneously to enter
~
~
181
FF
» and the indicator « A »
/
BAKING TIME
ETTING OF THE TIME
«
»
»
FF
Werbung
Inhaltsverzeichnis
