Installation - TECO 680 Original Anleitungen

- by inserting the forks of a lift truck under the machine so that the centre of the forks
correspond approximately to the centre line of the body (Fig. 3 TECO 680 PLUS).
CAUTION
Always unplug the power supply cable from the socket before moving the machine.
WARNING
Never apply force to the wheel spin shaft when moving the machine.
CAUTION
Take the utmost care when unpacking, assembling, lifting and setting up the
machine as indicated below.
Failure to observe these instructions can damage the machine and compromise
the operator's safety.
Remove the original packaging materials after positioning them as indicated on the
packaging and keep them intact so the machine can be safely shipped at a later
date if necessary.
CAUTION
Choose the place of installation in compliance with local regulations on occupa-
tional safety.
In particular, the machine must only be installed and used in protected environ-
ments where there is no risk of anything dripping onto it.
70
2

inSTallaTion

Operator's manual TECo 680 - 680 PlUS - 680 PlUS Pl
3