Fire-Extinguishing Materials To Be Used; Glossary - TECO 680 Original Anleitungen

FirE-EXTingUiSHing maTErialS To
Consult the following table to choose the most suitable fire extinguisher.
Dry materials
Water
Foam
Powder YES*
CO YES*
2
YES* Use only if more appropriate extinguishers are not at hand or when the fire
is small.
CAUTION
The indications in this table are of a general nature. They are designed as a guideline
for the user. The applications of each type of extinguisher will be illustrated fully by
the respective manufacturers on request.
below is a brief description of some technical terms used in this manual.
SELF-CALIBRATION
This procedure calculates suitable correction coefficients starting from known operat-
ing conditions. It improves the machine accuracy by correcting to a certain extent the
calculation errors that may result from the alteration of the machine's features over the
course of time.
AWC
Auto Width Calculation acronym
AWD
Auto Width Device acronym
ASP
Automatic Selection Program acronym
CALIBRATION
See SELF-CALIbRATION.
CENTRING
Procedure for positioning the wheel on the wheel balancer shaft to ensure that the shaft
axis corresponds to the wheel rotation axis.
BALANCING CYCLE
Sequence of operations to be performed by the user and the machine from the beginning
of the spin until the wheel is braked to a stop after calculating the unbalance values.
CONE
Conical element with a central hole which, when inserted on the wheel balancer shaft,
is used to centre the wheels having central holes with a diameter ranging between
maximum and minimum values.
124
BE USED
Flammable liquids
YES
YES

gloSSarY

Operator's manual TECo 680 - 680 PlUS - 680 PlUS Pl
NO
YES
YES
YES
Electrical equipment
NO
NO
YES
YES