Testing The Battery; Working With The Lawn Scarifier - Stihl RLA 240.0 Gebrauchsanleitung

English
12.2 Checking the Rollers
► Switch the lawn scarifier off, pull out the acti‐
vation key and remove the battery.
► Place the lawn scarifier on a level surface.
► Upend the scarifier,
► Check the length of the blades.
The minimum length of the blades is marked.
► If the minimum length is fallen below:replace
the roller, 21.2.
► If the blades are bent:consult a STIHL special‐
ist dealer.
► If anything is unclear:consult a STIHL special‐
ist dealer.
12.3

Testing the Battery

► Press button on battery.
The LEDs glow or flash.
► If the LEDs do not glow or flash: Do not use
the battery and contact your STIHL servicing
dealer.
There is a malfunction in the battery.
13 Working with the Lawn
Scarifier
13.1 Holding and Guiding the Lawn
Scarifier
► Hold the handlebar with both hands so that the
thumbs enclose the handlebar.
13.2 Setting the Working Depth and
Transport Position
The working depth can be infinitely adjusted.
34
17.1.

13 Working with the Lawn Scarifier

Setting the working depth
► Move rotary wheel (1) into the desired posi‐
tion.
The roller raises and lowers.
Setting the transport position
► Turn rotary wheel (1) anti-clockwise into the
highest position.
The roller raises and no longer touches the
ground.
13.3 Preparing the Lawn
The shorter the lawn is mown, the better the
scarifying results.The ideal grass height is
between 2 to 3 cm.
► Remove objects from the work area.
► Mark stationary obstacles (e.g. roots and tree
trunks).
► If the grass is higher than 3 cm:mow the lawn.
13.4 Scarifying and Combing
Scarifying with the scarifying roller
Scarifying involves scratching the turf to remove
weeds, moss, old clippings and lawn thatch.
0478-670-9909-C