Pkm KS 82.1F Bedienungsanleitung Seite 58

F
B
OTTOM DOOR HINGE
G
S
UPPORTING FOOT
4. Remove the door leg (4 & 7) and unscrew screws (6), remove lower hinge (5).
5. Change the position of the lower hinge (5) to the opposite side of the appliance,
locate and support the door onto the lower hinge (5), replace screws (6) and
adjustable foot (4 & 7), align door and replace the upper hinge (3) and replace
screws (2).
6. Fit the hinge cover (1).
NOTICE! Adjust the door properly before you finally tighten the screws of
the hinge. The seal must close properly.
7. Install the hinge cover (C) and the screw hole cover (B) again; s. fig below.
58