Werbung
Verfügbare Sprachen
Verfügbare Sprachen
*
Keep hot soldering irons or guns away from the
equipment.
*
Allow the equipment to stabilize at room temperature
before taking up measurement (important for exact
measurements).
*
Use caution when working with voltages above 35V
DC or 25V AC. These Voltages pose shock hazard.
*
Fetch out the battery when the meter will not be
used for long period.
*
Periodically wipe the cabinet with a damp cloth and
mid detergent. Do not use abrasives or solvents.
*
The meter is suitable for indoor use only
*
Unplug before cleaning
*
The power meter shall be used only in area with
installation
IEC664, in which the
not exceed 300V. The mains supply for residential
areas generally belongs to this category.
*
Do not store the meter in a place of explosive,
inflammable substances.
*
Do not modify the equipment in any way
Opening the equipment and service – and repair
*
work must only be performed by qualified service
personnel
*
Do not operate the meter, if the environmental
conditions
specifications (>75%RH, >40°C or <10°C)
Measuring instruments don't belong to children
*
hands.
category II (CAT II) according to
don´t
correspond
-31-
transient voltages do
to
the
technical
Werbung
