Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning The Appliance; Cleaning Function (Steam Clean) - Atag BCM4611C Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

MAINTENANCE

Cleaning the appliance

Clean the oven regularly to prevent fat and food particles from accumulating, especially
on the surfaces of the interior and the exterior, the door and the seal.
Activate the child lock (to prevent that the appliance is switched on accidentally).
Clean the exterior surfaces with a soft cloth and warm soapy water.
Next wipe with a clean, damp cloth and dry the surfaces.
Remove splashes and stains on the interior surfaces with a cloth and soapy water.
Next wipe with a clean, damp cloth and dry the surfaces.
Make sure that no water enters the vents. Never use abrasive cleaning
materials or chemical solvents. Always make sure that the seal of the door is clean.
This prevents accumulation of dirt and allows you to close the door properly.

Cleaning function (Steam clean)

With Steam clean and a damp cloth, you can easily remove grease and dirt from the oven walls.
Using Steam clean
Only use Steam clean when the oven has cooled down fully. It is more difficult to remove
dirt and grease if the oven is hot.
The program takes 30 minutes. Food remains on the enamel walls will be sufficiently soaked
after 30 minutes so that they can be removed with a damp cloth.
1. Remove all accessories from the oven.
2. Pour 0.15 litres of water into the bottom of the oven.
3. Select 'Cleaning' with the function knob.
4. Touch the confirm key to start Steam clean.
Do not open the door during the cleaning program.
EN 25

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Bcm4692cBcm46121c

Inhaltsverzeichnis