Lionelo Bastiaan RWF Bedienungsanleitung Seite 8

EN
Dear customer!
Should you have any remarks or questions concerning the product, please do not hesitate
to contact us: help@lionelo.com
Before you use the child safety seat for the first time, please read this manual carefully.
Producer:
BrandLine Group Sp. z o. o.
ul. A. Kręglewskiego 1, 61-248 Poznań, Poland
Important
Please read this manual before you use the product and keep it for future reference. The
manual can help you assemble the child safety seat properly. A wrong assembly may pose
a threat to your child. The manufacturer shall not be held responsible for potential damage
arising from wrong assembly of the seat.
This child safety seat is intended for weight categories (groups): 0, 0+, I, II and III, which
means it can be used by children whose weight does not exceed 36kg.
Weight group 0, 0+: 0-13 kg,
Weight group I: 9-18 kg,
Weight group II: 15-25 kg,
Weight group III: 22-36 kg.
•
Hard elements and plastic parts of the child restraint system must be placed and
installed in a way that they do not get trapped by sliding seat or vehicle door if the
vehicle is used normally.
•
For a rear-facing position: do not use the child safety seat in places in which an airbag is active.
•
The belts which hold the child safety seat must be tightened properly.
•
Any safety belts which hold the child must be well-adapted to its body. The belts
must not be twisted.
•
Make sure the hip belts go low so that a pelvis is properly supported.
•
Any accident or collision may damage the child safety seat, even if you cannot see it.
If the device has been subject to sudden overloads during accidents, please replace
it. In case of any doubts, please contact the seller or manufacturer.
•
Do not modify the child safety seat or install any additional elements unless a technical
certification body has approved it. To provide your child with top safety, fix and use
the device in accordance with the manual.
EN ‑ 8 ‑