Help In Case Of Malfunction; Risk Of Injury - AL-KO GT 2000 Betriebsanleitung

Help in case of malfunction

13 HELP IN CASE OF MALFUNCTION
CAUTION!

Risk of injury

Sharp-edged and moving appliance parts can lead to injury.
■
Always wear protective gloves during maintenance, care
and cleaning work.
Malfunction
Engine does not run.
Motor keeps cutting out.
Cutting blade becomes hot
when running. Generation of
smoke.
Branches are not cleanly cut.
Branches are often jammed
in the cutting blade.
Motor running, but the cutting
blade does not move.
Appliance vibrates unusually. Appliance faults
Rechargeable battery operat-
ing time is significantly
shorter.
442178_a
Cause
Rechargeable battery is flat.
Rechargeable battery miss-
ing or rechargeable battery
not seated correctly.
Power supply is interrupted.
Motor protection switch has
switched off the motor be-
cause of overload.
■
Appliance faults
■
The On/Off switch is de-
fective.
No oil on the cutting blade.
■
Cutting blade is blunt.
■
Nicks in the cutting
blade.
Cutting blade is blunt.
The sliding play of the cutting
blade is too great.
Appliance faults
The service life of the re-
chargeable battery has ex-
pired.
Remedy
Charge the rechargeable battery.
Insert the rechargeable battery cor-
rectly.
1. Remove the battery.
2. Clean the plug contacts on the ap-
pliance.
Wait until the motor protection switch
releases the motor.
Contact an AL-KO service centre.
1. Switch off the appliance and re-
move the rechargeable battery.
2. Clean and oil the cutting blade.
3. Insert the rechargeable battery
again.
Contact an AL-KO service centre.
Contact an AL-KO service centre.
Contact an AL-KO service centre.
Contact an AL-KO service centre.
Contact an AL-KO service centre.
Replace the rechargeable battery.
Only use genuine accessories from
the manufacturer.
53