Inspection Before Use - Panasonic EY4550 Bedienungsanleitung

18) Remove the battery pack from the
tool body before replacement of
the blade, making adjustments,
or other maintenance work.
19) Wear ear protectors when using
the tool for extended periods.
Symbol
V
n
0
-1
...min
reciprocations per minutes
Ah
WARNING:
• Do not use
Panasonic battery packs that are
designed for
rechargeable tool.
• Panasonic is not responsible for
any damage or accident caused
by the use of the recycled battery
pack and the counterfeit battery
pack.
• Do not dispose of the battery pack
in a fire, or expose it to excessive
heat.
• Do not drive the likes of nails into
the battery pack, subject it to
shocks, dismantle it, or attempt to
modify it.
• Do not allow metal objects to
touch the battery pack terminals.
• Do not carry or store the battery
pack in the same container as
nails or similar metal objects.
• Do not charge the battery pack in
a high-temperature location, such
as next to a fire or in direct
sunlight. Otherwise, the battery
may overheat, catch fire, or
explode.
Meaning
Volts
Direct current
No load speed
Revolutions or
Electrical capacity of
battery pack
To reduce the risk of
injury, user must read
and understand
instruction manual.
For indoor use only.
other than the
use with this
• Never
dedicated charger to charge the
battery
battery may leak, overheat, or
explode.
• After removing the battery pack
from the tool or the charger, always
reattach the pack cover. Otherwise,
the battery contacts could be
shorted, leading to a risk of fire.
• When the Battery Pack Has
Deteriorated, Replace It with a
New One. Continued use of a
damaged battery pack may result
in heat generation, ignition or
battery rupture.
III. ASSEMBLY
WARNING:
To reduce the risk of injury, always
remove battery pack before changing
the blade.

Inspection before use

• Has the correct jigsaw blade been
attached for the object to be cut?
• Has the correct stem shape and
thickness
mounted?
• Check if the blade is fixed securely?
• Check if the blade is cracked or broken.
• Check that there are no foreign objects
in the object to be cut.
Installing and removing the blade
Installation
1. The dust cover is removed.
2. Wipe away any cutting dust from the
blade and the blade clamp bracket.
3. Pull the blade Attach/Remove lever.
- 6 -
use other than
pack. Otherwise,
of the blade
the
the
been