Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope your new tool brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability
laws, the manufacturer of this device assumes no lia-
bility for damage to the device or caused by the device
arising from:
• Improper handling.
• Failure to comply with the operating manual,,
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts,
• Application other than specified.
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100, DIN
13 / VDE0113 not being observed.
Please consider:
Read through the complete text in the operating manu-
al before installing and commissioning the device.
The operating manual is intended to help the user to
become familiar with the machine and take advantage
of its application possibilities in accordance with the
recommendations.
The operating manual includes important instructions
for safe, proper and economic operation of the device,
for avoiding danger, for minimising repair costs and
downtimes, and for increasing the reliability and ex-
tending the service life of the device. In addition to the
safety instructions in this operating manual, you must
also observe the regulations applicable to the opera-
tion of the device in your country.
Keep the operating manual package with the machine
at all times and store it in a plastic cover to protect it
from dirt and moisture. They must be read and careful-
ly observed by all operating personnel before starting
the work. The device may only be used by personnel
who have been trained to use it and who have been
instructed with respect to the associated hazards. The
required minimum age must be observed.
26 | GB
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules for operating
devices of the same design must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device description (Fig. 1 - 2)
1.
Handle
2.
Engine brake lever
3.
Transport lever
4.
Lower push bar
5.
Plastic star grip nut
6.
Catch basket
7.
Discharge flap
8.
Belt cover
9.
Wheels
10. Oil dipstick
11. Working height adjustment
12. Tank cover
13. Air filter cover
14. Pull cable starter
15. Throttle
3. Scope of supply (Fig. 1 - 14, A - I)
A. Cable clamp (2x)
B.
Draw wire holder (1x)
C. Spark plug wrench (1x)
D. Locknut
E.
M8x30 hexagon screw
F.
Hexagonal bolt M8x45
G. Washer
H. Aerator roller
I.
Cutting roller
4. Proper use
The device is used as a scarifier. Moss and weeds are
pulled out of the ground together with their roots us-
ing the scarifying roller and the soil is loosened. This
helps the lawn to absorb nutrients better and cleans
it. We recommend scarifying the lawn in spring (April)
and autumn (October).
www.scheppach.com
Werbung
Inhaltsverzeichnis
Fehlerbehebung
