Shimano STEPS EP8 Originalbetriebsanleitung Seite 37

3.
Select assist mode.
* If you turn the power ON, assist mode is reset to [OFF] irregardless of the assist mode that you had selected before you
last turned the power OFF.
X
Y
Junction [A]
Press button
Button
4.
Get on the bicycle and start riding.
Assist will start when you start pedaling.
CAUTION
Be sure to learn the brake control characteristics and other characteristics. Brake handling may vary slightly depending on the bicycle
you are using.
5.
Turn the power OFF and park your bicycle when you arrive at your destination.
LED1
LED1
OFF
Lit in light blue
Lit in green
Lit in yellow
OFF
11
Cycle computer
Press the X and Y switch.
Assist mode display
[OFF]
X Y
[ECO]
[TRAIL] / [NORMAL]
[BOOST] / [HIGH]
[OFF]
[ECO]
[TRAIL] / [NORMAL]
[BOOST] / [HIGH]
[OFF]