Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The fans are not working
CHANGING DOOR OPENING SIDE
This appliance has reversible doors but is delivered with a right hinged door. The left hand hinge kit
comes with the unit (in the box), should you wish to reverse the hinge on your unit.
For your safety, please unplug appliance before doing this operation.
1. Lower hinge (Right)
4. Door
7. Top hinge (Left)
10. Door limit device
1. When open the door 90 degree, take out 2 screws (2) from lower door axis (3), remove the door (4),
then pull out the door and door axis (Fig. A).
2. Put the door (4) safety and take out the plug (12) from top of door frame, unscrew 1 screw (11) at
bottom and remove the Door limit device (10), then install the Door limit device (10) at top of door
frame, please use spare plug (12) to block the hole at top of door frame. (Fig. A/B)
3. Take out 3 hinge screws (6) from top hinge (right) (5) and remove it. (Fig. C)
4. Remove decorative nail (8) from left top of cabinet and install spare top hinge (Left) (7) at left top of
cabinet with 3 screws. (Fig. D)
5. According above procedure, install spare lower hinge (left) (9). (Fig. E)
6. The door revolves 180 degrees, install the door with same way it was removed and fix it with door
aligned.
7. Block the hole at right top of cabinet with spare decorative nail (8).
Imported by Sideme SA – BP200 – 92306 Levallois Perret – France
Control Panel to be replaced by your
2 . Screws
5. Top hinge (Right)
8. Decorative nail
11. Screw
Customer Care Service
3 .Door axis
6. Hinge Screws
9. Lower hinge (Left)
12. Plug
64
Werbung
