Maintenance Summary Table - Stiga Park Serie Gebrauchsanweisung

EN
documentation accompanying the machine,
• carelessness,
• incorrect or prohibited use or assembly,
• use of non-genuine spare parts,
• use of accessories not supplied or approved by STIGA SpA.
The warranty does not cover:
• Normal wear and tear on wear parts such as the auger, etc..
• normal wear and tear
• engines. Engines are covered by the warranty provided by the relative manufacturer in compliance with
the specified terms and conditions.
The purchaser is protected by his own national legislation. The purchaser's rights envisaged by the national
laws in his own country are not in any way restricted by this warranty.
Intervention
MACHINE
Check all fasteners
Safety checks/check controls
Check tyre pressure
General cleaning and inspection
General lubrication
Check the drive belts for wear
Check/correct steering
Battery charging
Cleaning the battery terminals
ENGINES/TRANSMISSION (general)
Check / Top up engine oil
Replacing / Filling the engine oil
Difficult conditions or high ambient tempera-
ture
Filter replacement
Replace fuel filter
Check / top up transmission oil
Replacement / transmission oil filler
Replacing the spark plugs
Cleaning the air intake
24

13 MAINTENANCE SUMMARY TABLE

ENGLISH
(Translation of the Original Instructions)
Frequency
service hours/calendar months
First time
-
-
-
-
-
5 hours
5 hours
-
For machines with an electric
-
-
25 hours
-
-
-
-
5 hours
-
50 hours
Then every
Before each use
Before each use
Before each use
At the end of each use
50 hours and after each
wash
50 hours
100 hours
Before putting into storage
starter: carry out a top-up
charge every four months.
When there is oxidization.
Before each use
250 hours / 12 months
25 hours / every season
100 hours, and at every oil
change
500 hours
50 hours
200 hours
200 hours
50 hours
ref. /
Ref.
Fig.
-
-
-
-
9.12
9.8
9.9
9.10
9.10.4
9.5
9.5.2
9.5.2
9.5.3
9.6
9.7.1
9.7.2
9.11.2
9.11.3