Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Outside shaft
Exhaust pipe
Bracket
14
MOUNTING
1.
The distance between the cooking surface and the lowest edge of the cooker
hood must be at least 65 cm.
2.
Once the height is defined, install the anchoring in the appropriate place. To
do this, you must first drill holes, and then fasten the anchorage to the wall
with the screws. (You will need a drill, suitable drill bits, dowels and screws).
3.
After the anchoring is fixed, according to the similar procedure, attach the
inside bracket for the fireplace facing. Make sure that the distance is correct
(please measure the distance), because the fireplace facing will be fixed to the
bracket later.
4.
Fix the outside clamp for the chimney facing to the outside of the facing and
check that the inside chimney facing can move freely in height. 5.
5.
Place the hood on the anchors (fasteners).
6.
Set the correct height of the inner chimney facing so that the brackets match
and fix them. Then you can fix the hood with the safety screws.
Mounting
Mounting
Inner shaft
Werbung
Inhaltsverzeichnis
Fehlerbehebung
