Installation Method 2: Built-In Mounting - Klarstein Contempo 10033470 Bedienungsanleitung

Installation method 2: Built-in mounting

• Drill 4 holes of 6 mm diameter at the bottom of the hanging cupboard
• Put the one way valve on the cooker hood, then install the cooker hood on the
bottom of the hanging cupboard, lighten the hood with enclosed 4 screws.
Notes:
(1) The extensible pipe are optional accessory, not supplied.
(2) Take off protection film before installation.
(3) There are 2 methods for ventilation, including horizontal ventilation and
vertical ventilation. Please pay attention method when installation.
Vertical ventilation (picture A):
Please use the tool to take out the round
cover before using, and the air can be
vented from the top.
Horizontal ventilation (picture B):
Take out the cover before using, and the
air can be vented from the back.
EN
27