Servicing; Cleaning - Silvercrest SKM 10 B2 Bedienungs- Und Sicherheitshinweise

SilverCrest SKM 10 B2
 Make sure that the 3.5 mm jack-type connector [2]
is properly inserted into the audio jack.
Sound output on one side only
 Check the stereo balance setting on the playback
device.
 Make sure that the 3.5 mm jack-type connector [2]
is properly inserted into the audio jack.

Servicing

The device does not contain any parts that require
maintenance. Do not attempt to open the housing of
the device, this will void your warranty.

Cleaning

To clean the headphones use a slightly damp cloth.
Never use any solvents or cleaners that may
damage the plastic. Make sure that no liquid gets
into the housing.
To clean the ear pads, remove them. Clean the ear
pads under running water. Dry the ear pads
66 - English