Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Page EN-18
Operation: Standard cycles
Operation: Standard cycles
(1)
individuell
Baumwolle
Synthetik
Mix
Jeans
Sportwäsche
20°C
Babybekleidung
Trommelreinigung
Before getting started
• First read chapter "Intended use" and
"Safety notices" (see page EN-4 and the
following).
• Remove the transport safety devices and
prepare the appliance as described in
chapter "Installation, connection and initial
commissioning" (see page EN-29).
• Properly attach the water inlet hose (29)
and the water outlet hose (20).
Selecting the cycle
NOTICE
Always select the cycle before loading
the washing machine. Otherwise the
loading sensor will not work.
The cycle table shows you the cycle which is
suitable for your laundry (see table "Standard
cycles" on page EN-18; for information on the
"Custom" cycle, see page EN-21).
1. To switch on the appliance, press the
button (9).
The display (6) lights up and shows the du-
ration of the current cycle.
(2)
(3)
Express15'
Schnell 45'
ECO 40-60
Intensiv
Wolle
Spülen
Schleudern
Temp.
2. Select the cycle using the cycle selector (1).
The display area (2) shows the current
washing water temperature, the display
area (3) shows the current spin speed and
the display area (6) shows the cycle time.
Example cycle: "Cotton"
Cycle time in hr/min
Washing water temperature
Spin speed
Start cycle
1. Open the tap completely.
2. Press the
The cycle starts as soon as the appliance
has determined the amount of laundry (ap-
prox. 1 minute).
The display (6) shows the remaining run-
ning time of the cycle. The colon symbol
between the hour and minute display flash-
es. The
the appliance lid is now locked.
Interrupting and continuing
the course of the cycle
We recommend only interrupting the cycle
for a brief period. Otherwise, the suds will
cool down and this will negatively impact the
washing result.
(6)
(5)
Ein/Aus
Funktion
Start/Pause
button (10).
LED (5) lights up to indicate that
(9)
(10)
03:39
40
1200
Werbung
Inhaltsverzeichnis
