During Use; Power On The Spirocom; Battery Power Level; Team Talk Function - INTERSPIRO Spirocom XL Gebrauchsanweisung

During use

Power on the Spirocom

1. Push the MODE button for 3 seconds and then release it. The display first
shows the battery power level (ex. "b4") then shows the group number.
2. If the unit does not start or the display shows "LO", replace the batteries.

Battery power level

The remaining battery level is shown in the display when turning on the power
on the Spirocom. It has five levels described below.
• b4 = > 75% battery power remaining.
• b3 = 50% - 75% battery power remaining.
• b2 = 25% - 50% battery power remaining.
• b1 = < 25% battery power remaining.
• b0 = Less than 2 hours of battery power. Change batteries when this level is
reached. When the batteries reaches this level during use, the LED indicator
starts flashing red and two dots are shown on the display.
• Lo = The battery power level is too low. Replace the batteries to start the
unit.

Team talk function

• The SpiroCom is started with the last used group number.
• To change the group number, push the PTT button one time for each
step. The group number can be changed within 5 seconds from powering up
the SpiroCom.
• When SpiroCom connects to a group "connected" is heard in the ear
speaker and the group number remains lit in the display.
• If the group number must be changed after the SpiroCom has been
connected to a group it needs to be restarted.

Long range radio transmission (PTT)

1. Lift and hold the PTT button to start a transmission.
2. Wait until the LED indicator shows a red light and a beep is heard in the
ear speaker - now you can speak.
22
Spirocom XL