Control Panel - Carrier 51QPD009N/PC-09HPPD Installationshandbuch

2. GENERAL OVERVIEW

2.3 CONTROL PANEL

6
7
1
ON/OFF Button
Operation starts when this button is pressed and stops
when this button is pressed again.
2
SLEEP Button
Active/Disable sleep function. The lamp
sleep function is activated.
3
FAN Button
Press this button to select the fan speed.
HIGH MID
ION Button*
When press this button more than 3 seconds, the Ionizer
function will be activated (the lamp
more than 3 seconds again to disable.
4
+ / - Button
Press this button to increase/decrease setting temperature.
5
MODE Button
Press the mode button repeatedly to change operation mode.
AUTO
COOL
[*] Model dependent
NOTE
All the pictures in this manual are for explanation purpose only. They may be slightly different from the air conditioner you
purchased (Model dependent).The actual shape shall prevail.
A guide on using the remote controller is included in this literature packaged.
8
9
5 4
will be on when
LOW
AUTO
will be on), press
FAN HEAT
DRY
– 5 –
10
3
2
6
TIMER Button
Press this button to initiate unit's auto on/off time.
7
SWING Button
Set the louver to auto-swing or stop swinging.
8
FOLLOW ME Lamp*
This lamp will be on while follow me function is
activated.
9
LED Display
It indicates the set temperature or auto timer setting.
While on DRY or FAN modes, it indicates the room
temperature.
10
POWER MANAGEMENT Lamp
In Cool/Heat mode, when the ambient temperature is
lower/higher than the set temperature for a period of
time, the compressor and fan motor will stop
automatically. This lamp will be on, indicating that
Power Management is activated.
11
POWER Lamp
G B
11
1