Replacing The Fuses - Benelli Tornado Naked TNT125 Bedienungsanleitung

Periodic maintenance and adjustment

Replacing the fuses

The fuse boxes and individual fuses are
located under the rider seat.
To access fuse box, the main fuse, and the
fuel injection system fuse, remove the ri-
EN
der seat. (See page 3-11).
6
If a fuse is blown, replace it as follows.
1. Turn the key to " " and turn off the
electrical circuit in question.
2. Remove the blown fuse, and then install
a new fuse of the specified amperage.
WARNING
Do not use a fuse of a higher amperage
rating than recommended to avoid cau-
sing extensive damage to the electrical
system and possibly a fire.
1 2 3 4
1. Injection
2. Main
3. Spare
4. Spare
6 - 28
Specified fuses:
Injection fuse: 15.00A
Main fuse: 20.00 A
Spare fuse: 15.00 A
Spare fuse: 20.00 A
3. Turn the key to " " and turn on the
electrical circuit in question to check if the
device operates.
4. If the fuse immediately blows again,
have a Benelli dealer check the electrical
system.