Clutch Lever; Shift Pedal - Benelli Tornado Naked TNT125 Bedienungsanleitung

Instrument and control functions
Electric ignition button
Press this button to start the engine with
the starter device.
EN
3

Clutch lever

The clutch lever is located on the left side
of the handlebar.
To disengage the clutch, pull the lever
toward the handlebar grip. To engage the
clutch, release the lever. The lever should
be pulled rapidly and released slowly for
smooth clutch operation.
The clutch lever is equipped with a clutch
switch, which is part of the ignition circuit
cut-off system. (See page 3-13).
3 - 6

Shift pedal

The shift pedal is located on the left side
of the motorcycle and is used in combi-
nation with the clutch lever when shifting
the gears of the 5-speed constant-mesh
transmission equipped on this motor-
cycle.
TIP
Always change down one gear at a time
and at the correct speed to avoid engine
overspeed and jamming of the rear wheel.