Cleaning - Heiniger Xpert/C Originalbetriebsanleitung

NOTE!
The provided oil is non-toxic and produces no irritation on
X
contact with the skin or the mucous membranes. This paraffin
oil degrades to some 20% after 21 days (CEL-L-33-T-82).
Oil the blades prior to, during and after every use.
X
Oil the blades no later than when the blades leave streaks or slow down.
X
Apply several drops of oil on the front and on the sides of the shearing
X
blades (see Fig. 11).
Wipe excess oil off with a soft, dry cloth.
X
Lubrication sprays do not have sufficient oil for a good lubrication, but
X
serve for cooling the shearing blades.
Immediately replace damaged or notched blades in order to avoid
X
injuries.
6.7

Cleaning

CAUTION!
IMPROPER CLEANING.
RISK OF DAMAGING THE SHEARING MACHINE!
Clean the shearing machine only with a dry cloth and with the
X
brush supplied. To clean the air filter, use exclusively a dry
brush or a nailbrush.
Never use compressed air for cleaning the clipper.
X
Housing of the shearing machine
Clean the housing of the shearing machine with a dry cloth.
X
Shearing blade and shearing head
Use the brush supplied to clean the shearing blade and the shearing
X
head.
Lubricate the shearing blades as described in chapter 6.6.
X
Air filter
Fig. 12
CAUTION!
POSSIBLE DAMAGE TO THE SHEARING MACHINE!
Operating the shearing machine without the air filter can damage
the shearing machine.
Only use the shearing machine with a properly fitted air filter.
X
Translation of the original instructions / Sheep shearing machine Xpert
Remove the air filter from the
X
shearing machine.
Clean the air filter with a dry brush
X
or a nailbrush. Make sure no foreign
objects get into the device while
cleaning it.
Slide the air filter back onto the
X
shearing machine.
15