Herunterladen Inhalt Inhalt Diese Seite drucken

Assembly - SCHUNK EOA-DRM PGN-plus P 80-1 Montage- Und Betriebsanleitung

Greifeinheit
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Assembly

5 Assembly
16
01.00 | ID no. 1399612 | Assembly and Operating Manual | en | 1399693
 WARNING
Risk of injury from falling of the product!
During transport and assembly/disassembly the product may fall
down and cause serious injuries.
Secure the product with adequately sized aids.
Wear suitable protective clothing.
 WARNING
Risk of injury due to unexpected movements!
If the power supply is switched on or residual energy remains in
the system, components can move unexpectedly and cause
serious injuries.
Before starting any work on the product: Switch off the power
supply and secure against restarting.
Make sure, that no residual energy remains in the system.
NOTE
• Observe the requirements for the compressed air supply,
Technical Data
[
}
 14].
• In case of compressed air loss (cutting off the energy line), the
product loses its dynamic effects and does not remain in a
secure position. However, the use of a SDV-P pressure
maintenance valve is recommended in this case in order to
maintain the dynamic effect for some time.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis