Hardware Installation - SEH myUTN-2500 Schnellinstallationsanleitung

 Hardware Installation
You can directly connect three USB devices to the myUTN-2500.
USB 3.0
USB 3.0
USB 3.0
USB devices
1. Connect the USB device to a USB port of the UTN server.
Important:
USB device and UTN server can be connected via a USB
cable, if required.
Only use USB cables shorter than 3 meters.
2. Repeat step 1 if you want to connect more than one USB device.)
3. Connect the network cable (RJ-45) to the UTN server.
4. Connect the power cord to the UTN server.
 The UTN server boots and then is ready for use.
Quick Installation Guide
network
myUTN-2500
[en]
clients with software tool
'SEH UTN Manager'
6