Hardware Installation - SEH dongleserver ProMAX Schnellinstallationsanleitung

 Hardware Installation
You can directly connect up to 20 USB dongles to the dongleserver ProMAX.
dongleserver
ProMAX
with
USB dongles
1. Connect the USB dongle to a USB port of the UTN server.
2. Repeat step 1 if you want to connect more than one USB dongle.
3. Connect the network cable (RJ-45) to network connector1 of the UTN server.
4. Optional: Connect another network cable (RJ-45) to network connector 2 the
UTN server.
This second network connection is for redundancy (backup).
5. Connect the power cord to the UTN server.
 The UTN server boots and then is ready for use.
Quick Installation Guide
clients with software tool
'SEH UTN Manager'
UTN connection
[en]
network
8