General Information; Purpose; Scope Of Supply - SEH myUTN-2500 Schnellinstallationsanleitung

 General Information

Purpose

The USB Deviceserver 'myUTN-2500' allows you to access non-network-ready
USB devices (e.g. hard disks, etc.) in the network. For this purpose, the USB
devices will be connected to the USB ports of the myUTN-2500. The software
tool 'SEH UTN Manager' handles the access to the USB devices.
The SEH UTN Manager is installed on all clients that are intended to access a USB
device in the network. The SEH UTN Manager shows the availability of all UTN
servers in the network and establishes a connection between the client and the
USB port including the connected USB device.
The administration of the myUTN-2500 is done via the 'myUTN Control Center' .

Scope of Supply

Check the package content before getting started:
UTN server
Quick
Installation
Guide
Power pack External power pack
Quick Installation Guide
USB Deviceserver 'myUTN-2500'
The Quick Installation Guide provides a brief
description of the installation of the myUTN-
2500.
(This document)
[en] 2