General Information; Purpose; Scope Of Supply - SEH myUTN-800 Schnellstartanleitung

General Information

Purpose

The Dongleserver 'myUTN-800' gives network participants access to USB dongles.
The USB dongles will be connected to the USB ports of the myUTN-800. The
software tool 'SEH UTN Manager' handles the access to the USB dongles.
The SEH UTN Manager is installed on all clients that are intended to access a USB
dongle in the network. The SEH UTN Manager shows the availability of all UTN
servers in the network and establishes a connection between the client and the
USB port including the connected USB dongle.
The lockable housing cover on the Dongleserver allows for a central and safe
storage of the USB dongles. The myUTN-800 itself can be mounted in a 19"
server rack.
The administration of the myUTN-800 is done via the 'myUTN Control Center'.

Scope of Supply

Please check the package content before getting started:
UTN server
Quick
Installation
Guide
2 Power
cords
2 Mounting
brackets
4 Screws
SD card
4
Dongleserver 'myUTN-800'
The Quick Installation Guide provides a brief
description of the installation of the myUTN-800.
(This document)
Power supply cable
65.5 mm × 43 mm × 29.8 mm
M4 × 4 mm
Inserted into SD card reader.
[en] Quick Installation Guide