Adjusting The Speed - Omnitronic DD-5220L Bedienungsanleitung

Adjusting the speed

The speed of the turntable and thus the pitch of a
title can be increased or reduced by up to 50 %
with the pitch control. With the control in mid-
position, the turntable plays at the exact, quartz-
controlled standard speed (0 % speed deviation).
1
As a basic setting after switching on, the
adjusting range for the speed is ±10 %.
To switch to ±20 % press the right button
[+/- 20].
To switch to ±50 % press the buttons [+/- 10]
and [+/- 20] simultaneously.
To return to ±10 % press the left button
[+/- 10].
To indicate the
respective button lights up.
2
Change the speed with the pitch control.
Slide it up to decrease the pitch, slide it down
to increase the pitch.
selected range, the
3
To switch back to the standard speed, press
the button [QUARTZ] (control LED for crystal
control lights up).
Switching to reverse run
With the button [REVERSE] you can switch over
the sense of rotation. For this purpose shortly
press the button. With the reverse run switched
on, the button lights up.
25/27 00063727.DOC, Version 1.0