Operating Elements And Connections - Omnitronic DD-5220L Bedienungsanleitung

Operating elements and connections

1 Start/pause buttons [
2 Buttons to select speed
• for 33⅓ RPM press the left button (basic setting)
• for 45 RPM press the right button
• for 78 RPM press both buttons simultaneously
To indicate the selected speed, the respective button
lights up.
3 Platter
4 Target light
5 Button START
To adjust the speed by which the turntable platter is
started.
6 Button BRAKE
To adjust the speed by which the turntable platter is
braked while stopping.
7 Button REVERSE
To switch between forward and reverse run.
8 Buttons to select speed range
• for 10 % press the left button (basic setting)
• for 20 % press the right button
• for 50 % press both buttons simultaneously
To indicate the selected speed, the respective button
lights up.
]
19/27
9 Headshell for phono cartridge system
10
Button QUARTZ
To switch between:
• the standard speed (basic setting): blue LED lights up
• the speed adjusted with the pitch control: blue LED off
11 LED for quartz control
Lights up at standard speed (basic setting).
12 Pitch control
(max. ±50 %)
13 Tone arm
14 Tone arm rest with locking lever
15 Tone arm lift
16 Anti-skating adjustment
17 Locking lever for the height adjustment
18 Counterweight scale
19
Counterweight for the tone arm
20
Height adjustment for the tone arm
00063727.DOC, Version 1.0