Operation; Playing A Record - Omnitronic DD-5220L Bedienungsanleitung

7. OPERATION

Playing a record

1
Switch on the turntable with the power
switch. The target light lights up.
2
To select the speed, press the corresponding
button:
• for 33⅓ RPM the left button (basic setting)
• for 45 RPM the right button
• for 78 RPM both buttons simultaneously
To indicate the
respective button lights up.
3
Put on the record. For 7" records, use the
adapter.
4
Open the locking lever for the tone arm to
the right. To lift the tone arm, place the lever
for the tone arm lift to the rear position.
5
Seize the handle of the tone arm, and place
the stylus above the beginning or the desired
spot on the record. Place the lever for the
tone arm lift to the front position. The tone
arm is slowly lowered onto the record.
selected speed, the
6
Press the start/pause button [
turntable platter starts to rotate. While
playing, the record can be stopped at any
place and be restarted with the start/pause
button [ ].
7
To obtain a slow start of the record, turn the
control [START] to the right correspondingly.
To start as quickly as possible, turn the
control to the left stop.
8
To obtain a slow braking of the record, turn
the control
correspondingly. To stop as quickly as
possible, turn the control to the left stop.
9
To stop the playing, lift the tone arm with the
tone arm lift and put it back onto the tone
arm support by hand. Stop the turntable
platter with the start/pause button [
10
After use of the turntable, secure the tone
arm with the locking lever and switch off the
unit with the power switch.
24/27
]. The
[BRAKE] to the
].
00063727.DOC, Version 1.0
left