Adjusting The Overhang - Omnitronic DD-2520 Bedienungsanleitung

Connect the Headshell's connection cables with the terminals of the pickup-system and make sure that the
occupation of the cables is correct.
The different colours mean:
Used colour: Channel and poles:
White (L+) Left, plus-pole
Blue (L-) Left, minus-pole
Red (R+) Right, plus-pole
Green (R-) Right, minus-pole
Tighten the screws on the Headshell.

Adjusting the overhang

The overhang is the distance between the stylus and the center of the turntable.
For optimized pick-up, the overhang should be set to 16 mm.
Loosen the tightening screws on the headshell and move the system forwards or backwards until you reach
the desired position.
Make sure that you tighten the screws before you operate the device again.
AUDACITY QUICK GUIDE
For the complete manual please check
http://audacity.sourceforge.net
Before starting the software
Make sure that your USB turntable is plugged into the computer and both the computer and the turntable are
plugged in and on.
To install software (PC)
1. Plug in your turntable to an AC outlet and connect the USB port on the Turntable to the USB port of your
computer.
2. Turn on the power switch to your turntable.
3. Windows system will detects a new device and that it is available to use.
4. Insert the CD that came with your USB turntable.
5. Run the file to install Audacity software. Once installed, run the Audacity program.
Please note: The USBTurntable may show up with a different name in Windows system. This may depend
on your computer model and operating system. 99% of the time it will contain USB in the name.
To install software (MAC)
1. Insert the included CD
2. Open the CD icon on the desktop.
3. Drag the installation folder for audacity to your hard drive. We recommend that you move the folder to your
Applications folder.
4. A window will come up which shows the files copying.
5. EJECT the CD.
6. Open Audacity from where you moved it to on your hard drive.
16/25 00030007.DOC, Version 1.2