Silvercrest SDM 1500 D3 Montage-, Bedienungs- Und Sicherheitshinweise Seite 9

In case of malfunction, repairs
are to be conducted by qualified
personnel only .
m WARNING! Risk of electric
shock! Do not immerse the
product's electrical components in
water or other liquids . Never hold
the product under running water .
m WARNING! Risk of electric
shock! Never use a damaged
product . Disconnect the product
from the power supply and
contact your retailer if it is
damaged .
m WARNING! Risk of injury!
The product has to be unplugged
after use and before cleaning or
maintaining the product .
Connect the product only to an
earthed wall socket .
Always make sure that the power
plug is correctly inserted into the
wall socket .
The product is not to be used if
it has been dropped, if there are
visible signs of damage or if it is
leaking .
Before connecting the product
to the power supply, check that
the voltage and current rating
corresponds with the power
supply details shown on the
product's rating label .
Regularly check the power plug
and the supply cord for damages .
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent
or similarly qualified persons in
order to avoid a hazard .
Protect the power cord against
damages . Do not let it hang over
sharp edges, do not squeeze or
bend it . Keep the power cord
away from hot surfaces and
open flames and ensure that
nobody can pull on or trip over it
unintentionally .
The product must not be left
unattended while it is connected
to the supply mains .
The liquid or steam must not
be directed towards equipment
containing electrical components,
such as the interior of ovens .
GB 9