Management Host; Tabelle 72: Cli "Management Host" Configuration - WAGO 852-1813 Handbuch

WAGO-Industrial-Switches
852-1813 Lean-Managed-Switch
Example
L2SWITCH(config)#time ntp-server 192.5.41.41
L2SWITCH(config)#time timezone +0800
L2SWITCH(config)#time ntp-server enable
L2SWITCH(config)#time daylight-saving-time start-date first Monday 6 0
L2SWITCH(config)#time daylight-saving-time end-date last Saturday 10 0
10.2.2.4

Management Host

Tabelle 72: CLI "Management Host" Configuration

Node
enable
eth0
eth0
eth0
Example
L2SWITCH#configure terminal
L2SWITCH(config)#interface eth0
L2SWITCH(config-if)#management host 192.168.200.106
Command
show interface eth0
Show
management host A.B.C.D The command adds a management host address.
no management host
A.B.C.D
Description
The command displays all eth0 interface
configurations.
The command displays all eth0 interface
configurations.
The command deletes a management host address.
Anhang 179
Handbuch
Version 1.0.0