WAGO-Industrial-Switches
852-1813 Lean-Managed-Switch
10.2.3.2
VLAN
10.2.3.2.1 Port Isolation
Tabelle 77: CLI "Port Isolation" Configuration
Node
enable
interface
interface
Example
L2SWITCH(config)#interface 1/0/2
L2SWITCH(config-if)#port-isolation ports 3-10
Command
show port-isolation
port-isolation ports
PORTLISTS
no port-isolation
Description
This command displays the current "Port Isolation"
configurations.
"V" indicates that the port's packets can be sent to
this port.
"-" indicates that the port's packets cannot be sent to
this port.
This command configures a port or port range to
forward data packets from a specific port.
This command configures all ports to forward data
packets from a specific port.
Anhang 183
Handbuch
Version 1.0.0