174 Anhang
Example
L2SWITCH(config)#time ntp-server 192.5.41.41
L2SWITCH(config)#time timezone +0800
L2SWITCH(config)#time ntp-server enable
L2SWITCH(config)#time daylight-saving-time start-date first Monday 6 0
L2SWITCH(config)#time daylight-saving-time end-date last Saturday 10 0
10.2.2.4
Management Host
Tabelle 72: CLI "Management Host" Configuration
Node
enable
eth0
eth0
eth0
Example
L2SWITCH#configure terminal
L2SWITCH(config)#interface eth0
L2SWITCH(config-if)#management host 192.168.200.106
Handbuch
Version 1.0.0
Command
show interface eth0
Show
management host A.B.C.D The command adds a management host address.
no management host
A.B.C.D
Industrial-Managed-Switches
852-1816 Lean-Managed.Switch
Description
The command displays all eth0 interface
configurations.
The command displays all eth0 interface
configurations.
The command deletes a management host address.